Home › Forums › Help/Technical Questions › FRUSTRATING PITCHFORK PROBLEM!

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 2, 2016 at 10:37 pm #84297
    TConnell
    Member

    Need assist with frustrating problem; I have brand new Pitchfork. When plugging Strat into input and then connecting output to amp, it works beautifully-loveitloveit. BUT, if I put in my pedal chain — in front of Big Muff (see below) — the guitar makes no sound – at any volume. Without the Pitchfork connected, the pedal chain works perfectly. FYI, I am running Pitchfork on 9Volt Battery.

    Pedal Chain config without Pitchfork: Big Muff–> Boss Super Overdrive–>Boss Digital Delay–>MXR Phaser->Boss Chorus–>Boss 63 Reverb–> into Fender Mustang III amp.

    Aaarrgh! Somebody toss me a lifeline! Where am I going wrong?

    Thanks in advance,

    Tconnell

    March 4, 2016 at 9:39 am #121319
    jayrope
    Member

    … i hope you didn’t plug your guitar into the expression pedal input. Happened to me before. :D

    March 4, 2016 at 3:03 pm #121322
    TConnell
    Member

    Thanks — in defense of you, I almost plugged into the expression input but didn’t. FYI, I discovered the problem and it was,…wait for it,….a bad friggin cable I used to connect the PF to the rest of the chain…..I began troubleshooting this AM and finally discovered the culprit.

    Incredible..;-( Sounds great now!

    TC

    March 12, 2016 at 6:57 pm #121336
    jose74
    Member

    ;-)
    does your pedal makes noise when engage ? i mean it SHHHHHHHHHHHHHHHHes on my side.
    not THAT big, but BIG enough to be a real problem (my micro pog is much more silent).

    October 21, 2020 at 12:25 pm #126560
    Andyjt78
    Participant

    Low octave sounds great high octaves sound cheesy. Tracks well. Chorus (detune) is actually really cool. Cons – makes hiss when engaged. Wish they made the increments of adjustment a half step instead of a major scale so that it could be used as a capo for frets 1-8. Remove octave 3 it has no practical use.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.