My second SMMH is unfortunately in a bit of trouble still.
1) All pots and the white Hazarei selector switch are functioning correctly.
2) Momentary switch and Bypass switch are OK mechanically.
3) Both inputs and both outputs are functioning correctly.
4) Save and call up Preset function is working correctly.

– What isn’t working is the Loop function. When NOT selected it comes on a few milliseconds after actuating the Standby footswitch at all echo selections bar one which is the Multitap 1 Second + Rev mode. With this selection it does not work at all.

– With all other echo selections it is on permanently (see above) and always keeps the recording function on for the maximum recording time.

– The Tap/Record switch is mechanically in order (see above) however has no influence on either the Tap Tempo of the echo selected or the Start/Stop function of loop recording.

– When only Loop mode is selected, the Loop led lights up as soon as the Standby switch is actuated instead of lighting up when the Record momentary switch is pressed down.

– When the Record momentary switch is released this has on influence whatsoever on the Loop duration (see above)

– When the Standby switch is actuated to go into Bypass mode the Loop led TURNS OFF deleting the Loop instead of remaining on and keeping the Loop until the momentary switch is pressed down in Standby mode in order to delete the Loop as desired.

Any ideas?

Many thanks in advance!

P.S. My other SMMH and all my other EHX pedals are working perfectly.