Home › Forums › Tips, Tricks, Clips, and Pics › Advice Needed – Pedal Board Set Up

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 18, 2013 at 8:48 pm #82813
    DannyT
    Participant

    Just about to take everything off my board to replace the patch leads with a new Planet Waves kit.

    I thought it was a good time to ask some advice about layout, currently my chain is as follows:

    Guitar >
    Boss TU-2
    Boss CS-2
    Jim Dunlop Cry Baby
    Ibanez Tube Screamer
    Boss CE-3
    EHX Wiggler
    EHX Small Stone
    Boss DD-2
    MXR Micro Amp
    Boss NF-1 Noise Gate
    > Fender Hot Rod

    This all works for me but wondered if anyone had any better ideas?

    Any suggestions gratefully received.

    Thanks

    Danny

    January 19, 2013 at 7:00 pm #118684
    TenSecondTed
    Member

    Looks pretty similar to how I would set it up.
    Maybe the Micro Amp before the Tube Screamer?

    January 19, 2013 at 7:07 pm #118685
    TenSecondTed
    Member

    *(awesome board, by the way!)

    January 20, 2013 at 9:57 am #118687
    DannyT
    Participant

    Thanks, I’ll try the Micro amp up the chain.

    Your set up looks very cool. I play a Gretsch and Starts too!

    Cheers

    Danny

    June 21, 2013 at 6:17 pm #119188
    Folkstone57
    Member

    Get an audio loop patcher like the Rocktron PatchMate or Carl Martin Octa-Switch. Gives you a lot more flexibility with your pedalbaord.

    June 22, 2013 at 12:40 am #119190
    Disarm D’arcy
    Member

    The place of the MXR MIcro amp should be chosen for the way you’ll use it. If you’re looking for gain, put it with your dirtboxes, if it’s volume you use it for, put it closer to the end of the chain ;)

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.