Home › Forums › Vintage EHX › Old Clone Theory power adapter?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 8, 2013 at 8:08 pm #82789
    samantien
    Member

    Hi,

    I have an old Clone Theory pedal (late ’70s) that needs a new power adapter. I’ve never had the original adapter for it and the one it came with broke and is not possible to repair.

    I know it should be a 24V 100mA adapter, but is it AC or DC? Does Electro-Harmonix make these adapters anymore?

    Thanks in advance,

    – Tuomas

    January 8, 2013 at 8:10 pm #118554
    The EH Man
    Moderator

    It’s DC. They still sell adapters that will work. For the US version, you’ll need a US24DC-100.

    January 8, 2013 at 8:38 pm #118615
    samantien
    Member
    Quote:
    It’s DC. They still sell adapters that will work. For the US version, you’ll need a US24DC-100.

    So it’s DC even if the pedal has a sticker on it that says “USE 24VAC 100MA only”?
    The reason I’m asking this is because I’ve heard a few people saying that it’s DC, but the sticker on the pedal is telling me to use AC.

    Also the original adapter had a 3,5mm plug connector. The new ones have the standard DC connector that fits pretty much every pedal on the market.

    – Tuomas

    January 8, 2013 at 8:41 pm #118616
    The EH Man
    Moderator

    If it says AC, then use AC.

    March 13, 2017 at 10:59 pm #122684
    brohoho
    Participant

    They did make some units that take 24vAC. I had a Stereo Memory Man that needed that adapter. Like you said the 3.5mm plug type. Analog Man has them on his site but they are not cheap.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.