Home › Forums › Help/Technical Questions › METAL MUFF PROBLEM

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 5, 2011 at 8:33 pm #81587
    sebacast
    Member

    HELLO EHX TECHNICIANS I’M WRITING TO YOU IN ORDER TO GET SOME ANSWERS IN WHAT DID I DO WRONG, BECAUSE MY METAL MUFF GOT SOME OF THE PROBLEMS I SEE AROUND THE WEB LIKE NO LED AND NO SOUND POWER.
    SINCE MY PEDAL HAD THAT PROBLEM I LOOKED AROUND THE WEB AND I FOUND THAT I AM NOT THE ONLY ONE WITH THIS ISSUE.
    I’LL EXPLAIN MY CONFIGURATION: GUITAR – CRYBABY WAH – METAL MUFF – MEMORY TOY – AMP.
    ALL THESE THREE PEDALS WITH A 9V 1000mA ADAPTER SERIAL CONECTED. SOME TIME AROUND A MONTH MY METAL MUFF DIED.
    I KNOW THAT MEMORY TOY CONSUMES 25 mA, METAL MUFF CONSUMES 200 mA, AND THE CRYBABY IS A LOW CONSUMER BUT WHAT WAS MY PROBLEM, THE ONLY THING I GUESS COULD HAPPENED IS THAT MEMORY TOY DEMANDED SO MUCH AMPERAGE THAT THE METAL MUFF CRASHED, BUT I USED A 1000 mA ADAPTER DIVIDED IN THREE PEDALS.
    PLEASE CAN YOU TELL ME WHAT DO I NEED TO DO NEXT BECAUSE MY METAL MUFF IS BEING REPARED AND I DON’T WANT THIS TO HAPPEN AGAIN

    SINCERILLY

    SEBASTIAN C

    May 5, 2011 at 9:07 pm #115143
    The EH Man
    Moderator

    First, find out from your repairman what the problem was with the Metal Muff. It may not have anything to do with the adapter.

    May 5, 2011 at 9:23 pm #115144
    sebacast
    Member

    OK SO I CAN CONNECT THIS AGAIN THE WAY I DID?
    AND IN RESPONSE OF YOUR REPLY I GUESS THIS GENERAL PROBLEM IS A FACTORY PROBLEM OF SOME METAL MUFF PEDALS THAT WENT WRONG IN PRODUCTION

    May 5, 2011 at 10:34 pm #115145
    The EH Man
    Moderator

    I suppose it’s OK.
    Please turn your caps lock off in future posts.

    May 6, 2011 at 2:52 pm #115148
    Cryabetes
    Participant

    Also, we’re not EHX technicians, just enthusiasts who occasionally dabble in repair/mods. EHX technicians can be contacted at http://newsensor.com/CutomerServices.aspx

    May 6, 2011 at 2:53 pm #115149
    The EH Man
    Moderator
    Quote:
    Also, we’re not EHX technicians,

    But we do play them on television.

    May 7, 2011 at 1:17 pm #115103
    julian
    Moderator

    The all caps makes it very hard to read your posts.

    As far as I know, not getting enough amperage can’t break a pedal.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.