Home Forums EHX News Effectology Episode 20: “The Caribbean Steel Drum Effect

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #81356
    Effectology
    Member

    Effectology Episode 20: “The Caribbean Steel Drum Effect”

    #114288
    bill ruppert
    Participant

    Below are the pedal settings for Effectology Episode 20: “The Caribbean Steel Drum Effect.”

    The steel drum sound is produced using a combination of pitch shifting and flanging with the modulation stopped.

    SteelDrumEffectjpg.jpge

    Pitch shifting can be done with either a HOG or POG pedal. An octave above is created and filtered to remove the top frequencies. When using the HOG, the attack slider is adjusted to reduce the sustain of the guitar signal. This helps emulate the percussive nature of a steel drum.

    pog2steeldrum.jpg

    steeldrumHOG.jpg

    The pitch shifted signal is then feed into a Poly Chorus pedal in the filter matrix mode. The filter matrix mode is basically flanging with the sweep disabled. This produces the metallic resonance of a metal tube or drum.

    stereo-polysteeldrum.jpg

    Playing staccato or with very short notes helps emulate the steel drum sound even further.

    Below are the settings for the bass part.

    microsynthsteeldrum.jpg

    The maracas or shaker sound was produced by sliding an EHX manual across the guitar strings. Using EQ to lower the bass and increase the middle frequencies helps shape the sound.

    The opening drone sound was recorded in two parts. The surf or ocean wave sound is white noise from a Big Muff fuzz manually filtered by a Micro Synthesizer pedal.

    oceanWaves.jpg

    The chord pad sound is a chord frozen using a HOG pedal in freeze mode and looped in a Stereo Memory Man with Hazarai. A second or different chord was frozen and looped on top of the first chord, producing a cluster of notes or what’s called a poly-chord.

    Thanks for watching
    Bill Ruppert

    #114284

    ugh! i cant wait to get out of school to see this!!!

    a friend and i found a similar thing with his boss me-50 a few weeks ago. we plugged in the mic and shot it up an octave. when you sing falsetto (head voice) it sounds like steel drums. its pretty funny. i could sit down and hold the mic inbetween my legs and with my head slightly down, it would pick it up. then i would air drum to what i was singing. it was dumb but lots of fun to mess around with.

    #114293
    C.J.
    Participant

    how about the electric mistress in filter matrix? would that create sort of the same idea?

    #114294
    Effectology
    Member

    Yes that should work as well.

    Quote:
    how about the electric mistress in filter matrix? would that create sort of the same idea?
    #114296
    C.J.
    Participant

    I’ll try it out and report back. mainly the question is, are the filter matrix modes on the polychorus and the electric mistress similar in function / sound ?

    #114304
    sreeths
    Member

    Cool! I’ve been using an Electro Harmonix pedal for two years now and have been getting the perfect steeldrum sound with my violin..I’ve even recorded with it and it transfers quite nicely..You can hear it on our new album Gone Bamboo at http://www.reverbnation.com/coconutradioband ……many people come to the stage and look for the drums!!! If you want me to send a video I will! This is a great product.

    #114324
    Brooklyn
    Participant

    YEAH MON! Irie, Bill! All good, yes Sir! As always, Bill, another great clip. I have a neighbor, a few houses down, who always plays his Steel Drums loud & proud. I can not wait to give him this Guitar sound back. I have a Hog but no Poly Chorus; I will try it with my Flanger Hoax. Wish me luck. If you read on the Internet that a New York Guitar player was murdered by a Jamaican Steel Drummer, don’t feel bad Bill, it was not your fault, yeah Mon! ;-)

    #116844
    Porsha
    Member

    Awesome thread! Thanks for the info :D I cant wait to try this out!

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.