Home Forums Help/Technical Questions Hog sizes

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #80396
    LOOPMAN
    Member

    Hi people,I need to know the sizes of the HOG(I don’t own it yet),coz I’m planning the purchasing of a PedalTrain pedal board.I don’t find the sizes on the owner manual of the HOG,someone could give me them?
    thanks a lot..

    #109754
    julian
    Moderator

    Just measured mine!

    9 1/4″ x 6 “

    Remember you’ll have a bunch of stuff sticking out the back (less so if you use right angled cables)

    #109755
    Cryabetes
    Participant

    edit: nevermind

    #109756
    julian
    Moderator

    Foot controller is the same size of my frequency analyzer, which is about 8″x7″.

    #109760
    LOOPMAN
    Member

    thanks guys!!

    #114263
    freezerguy
    Member

    hello there, i consider getting a hog and need to do some planning..

    what size is the exp pedal and do you keep it on or off the board? also, do you keep the hog on the board or on a table?

    …for my ambient swells i expect to use the sliders/knobs a lot for adjustments and layering. how much of what the hog has in store can actually be carried out via the exp pedal vs. what can actually only be done by hand? –> wouldn’t it perhaps be better then to keep the hog on the table (where it’s easier to reach) next to my mixer?

    thanks! fg

    #114273
    julian
    Moderator

    I’d use it table top. You can do volume swells and bends with the pedal, but if you wanted to swell different voices independently- the expression pedal can’t really handle that.

    #114276

    It’s also 2″ high. Good loin about right angle connectors.. Except the expression pedal it comes with is a straight molded 1/4. So you’ll have to replace that if ya need the space. Otherwise, allow another 2.5″+/- for your jacks.

    #114277

    MAudio expression pedal is 8 1/4″ x 3 3/4″ x 2″. Allow a lil extra space in back for the molded cable.

    TGM

    #114279
    freezerguy
    Member

    thanks!! :)

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.