Home › Forums › Vintage EHX › LPB 2

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 1, 2010 at 6:52 pm #80291
    3reasons
    Participant

    I am in desperate need of a picture or schematic (although I can’t read them) of the LPB 2 wiring. I found pics on the site from someone else but it has a 4 pole on off switch, where mine has a 3 pole. The box works but it looks like in my younger day I may have screwed with some of the workings based on some of the solder joints are very messy. I am the original owner and the pictures I refered to being on this site are at “viewthread/2909/. I really want to fix this thing as I use to use it with a screaming bird and loved it.

    June 1, 2010 at 7:00 pm #103071
    The EH Man
    Moderator

    Your footswitch has 3 lugs and one of those is slightly different from the other 2. That lug goes to the output jack. Your input jack goes to one of the other ones (doesn’t matter which) and to the circuit input. The last lug connects to the center lug of the Level control.

    June 17, 2010 at 3:12 am #109535
    3reasons
    Participant
    Quote:
    I am in desperate need of a picture or schematic (although I can’t read them) of the LPB 2 wiring. I found pics on the site from someone else but it has a 4 pole on off switch, where mine has a 3 pole. The box works but it looks like in my younger day I may have screwed with some of the workings based on some of the solder joints are very messy. I am the original owner and the pictures I refered to being on this site are at “viewthread/2909/. I really want to fix this thing as I use to use it with a screaming bird and loved it.

    EHMan thank you for the reply, sorry it took so long. Is it possible to get a picture of the internal wiring. You did answer some of the question but I would like to check that I didn’t mess up some of the other wires. Thank you in advance.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.