Home Forums Help/Technical Questions Power supply question for EH man

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #79977
    j-45
    Member

    Hey there,
    I live in Australia and just received a holy grail nano, mail order from the U.S..
    It came with the 120 Ac supply, as I didn’t have the option of 240 when I ordered it.

    I notice a lot of other posts from Australia with similar questions, so i’m sorry to harp on about the same subject, but I dont want to fry the thing before I get a chance to use it!

    Can you please clarify your post below…
    The supply you’ve recommended is 9.6vdc 200ma, and you have said that anything “9vdc” 200ma with correct polarity should work
    (Such as the boss psa240, which powers my other pedals).

    Just wanted to double check thats its o.k. to ignore the all the Warning labels before i plug it in!

    Thanks for the help.

    Quote:
    EH specifies this one: http://newsensor.com/ProductHighLight.aspx?ProId=637

    As long as it has 9vdc, 200mA, and the correct polarity it should work.

    #108151
    The EH Man
    Moderator

    It should be OK.

    #108155
    Ned Flanders
    Moderator

    You can also buy a VDC 1,500mA adapter from cheap as chips for about 10bucks. You can make it negative center or positive center and it has a switch on it to go from 4VDC to 12VDC.

    If you buy one make sure you read the instruction to get the polarity right.

    They rock, are cheap,quiet and if you use a daisy chain they can power a shit load of pedals being 1,500mA and all.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.