Home › Forums › Help/Technical Questions › Broken Bypass Switch – Stereo Memory Man w/ Hazarai
- This topic has 10 replies, 4 voices, and was last updated 14 years, 5 months ago by phreed.
-
AuthorPosts
-
January 25, 2010 at 3:55 am #79756phreedMember
Hello!
For quite a while the bypass switch on my Memory Man has been finicky. Sometimes it works, sometimes it doesn’t. It’s definitely not trustworthy enough for live use at the moment.
I’m wondering what model of switch I need to purchase to properly replace the malfunctioning one myself.
Phillip
March 8, 2010 at 3:01 am #88672jeffersMemberi’ve got the same issue. sometimes it works, sometimes it doesn’t. when it doesn’t, no signal goes through. any help would be appreciated.
March 8, 2010 at 3:11 am #108253Open it up and mess around with the seatbelt looking thing. Just kinda trial and error finicking helped me fix this problem. I understand how depressing an unreliable digital delay is.
March 8, 2010 at 3:20 am #108254Ned FlandersModeratorIf its the switch and you don’t know how to solder you will have a very hard time replacing it as the solder EHX use now is Lead free and takes quite a bit of heat to make it flow and makes removing existing parts harder than usual.
Its not impossible to do by any means it just takes a little know how so you don’t destroy anything.
if the pedal is under warranty contact EHX to let them fix it: info@ehx.com
March 8, 2010 at 3:37 am #108255jeffersMembertried the wiggling. no go.
i’m not horrible at soldering, but not very well practiced nonetheless. i suppose i’d rather someone who knew exactly what they were doing handling it.
it worked fine when i got it and has been until recently. how much would one be looking to pay for a repair? and how long it turnaround usually?
March 8, 2010 at 3:52 am #108257Ned FlandersModeratorEHX repairs are cheap.
PM’d BTW.
March 8, 2010 at 4:10 am #108256jeffersMemberthanks for the help, everyone. i’ll shoot ehx an email to see what they can do for me.
March 8, 2010 at 6:24 pm #108264phreedMemberQuote:If its the switch and you don’t know how to solder you will have a very hard time replacing it as the solder EHX use now is Lead free and takes quite a bit of heat to make it flow and makes removing existing parts harder than usual.Liberty Belle, I do know how to solder, so that would be no problem! Do you know of the specific model of switch that the SMMWH implements? Thanks for the previous discussion.
March 8, 2010 at 8:16 pm #108265Ned FlandersModeratorMarch 8, 2010 at 9:17 pm #108268phreedMemberThanks Liberty Belle! I just placed my order for the switch. Looking forward to getting my Memory Man ship shape. It will be a blessing to have that pedal working again!
March 15, 2010 at 2:51 am #108526phreedMemberI ordered the switch from the aforementioned site! The switch was in my mailbox about three business days later.
Once I had the switch, it was as easy as desoldering and removing the old one and soldering the new one! Glad to have that problem sorted out. :thumb:
I do, however, have one last question. Which Voodoo Labs Pedal Power 2+ output and dip switch setting should i use to power the SMM>? I’d like to make sure i have that set up correctly.
-
AuthorPosts
- You must be logged in to reply to this topic.