Home › Forums › Help/Technical Questions › BMPi w TW volume drop

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 20, 2009 at 7:36 pm #79353
    chev
    Participant

    My BMPi w TW as got a big volume drop lately.

    It still work but instead of using it with the volume at noon or 1:00, it now needs to be push around 3:00 and over and there’s a big jump starting from 3:00 to max?

    Is it a knowned issue?

    I also have a BassBMPi that works normally and usually gives an equal output level when set to same volume level.

    thanks for any help.

    November 20, 2009 at 11:38 pm #104005
    electro-melx
    Moderator

    mmm, no other reports of this that I know of…..have you put any other new pedals in your chain recently?

    I’ve found sometimes one will affect the other.

    November 21, 2009 at 4:01 pm #104019
    chev
    Participant
    Quote:
    mmm, no other reports of this that I know of…..have you put any other new pedals in your chain recently?

    I’ve found sometimes one will affect the other.

    I’ve tried my BMPi w TW alone and it’s lower than before.

    I just got the Cathedral that’s at the end of the chain.

    It actually gives a boost to my left and right chains so it equal everything up but if I turn it off, the BMPi TW becomes a few dB lower than the BassBMPi that stays the same?

    it also go true a Hoax and a DMM before going into the Cathedral Right input, the BassBMPi goes straight to the Cathedral Left input.

    For know I’ve been testing on computer music software so it’s easy to see the dropped signal.
    But I keep the Cathedral on at all time so it kind of fix the issue this way…

    The forum is cropping the picture so here’s the link to my pedalboard schematic:

    Code:
    http://i594.photobucket.com/albums/tt27/epoirier21/pedalboard21-11-09.jpg
  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.