Home › Forums › Help/Technical Questions › Where to find a replacement Color switch for Small Stone…?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 11, 2009 at 3:21 am #77723
    JABCo
    Member

    Hi folks,

    The plastic slider in the Color switch on my Small Stone snapped off, so I need to replace it. In looking for a new one (mainly @ Mouser), I haven’t come across any models that seem to match the original. Any advice? Where can I find a matching replacement (DPDT On-On 0.5A/125V DC [so says the original…])?

    Thanks!
    JB

    February 11, 2009 at 5:19 am #93065
    Ned Flanders
    Moderator

    This is an exact replacement: http://www.smallbearelec.com/Detail.bok?no=37

    February 11, 2009 at 7:00 am #93074
    JABCo
    Member

    Brilliant – thank you!!

    JB

    March 31, 2014 at 1:03 pm #119816
    toddwp
    Member

    I replaced my color switch with a DPDT on-on as described, but it does not seem to function properly. When “off” the phaser seems to suffer from a precitious drop in one of the phases (it gets muddy at one point in the “swoosh”) and when its “on” it cuts off entirely.

    I wired the switch directly to the main PCB (i.e. removed the 6-pin ribbon cable and connected the switch via hookup wire to the PCB pin corresponding to the little switch PCB…. at least according to a physical trace of the switch PCB.

    Is there something else happening on that little mini-PCB the original switch is wired into? I’m working with a version 4 reissue SS btw. Thanks for any info.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.