Home › Forums › Help/Technical Questions › How can I remove Memory Man ‘s knobs to see the circuit?

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • January 30, 2009 at 5:35 pm #77658
    wildboy85
    Member

    How can I remove Memory Man ‘s knobs to see the circuit? they seems blocked….
    Need help!

    January 30, 2009 at 5:59 pm #92249
    julian
    Moderator

    which memory man?

    January 30, 2009 at 6:02 pm #92250
    electro-melx
    Moderator

    blocked?

    January 30, 2009 at 8:33 pm #92269
    Ned Flanders
    Moderator
    Quote:
    blocked?

    I LOLd too, blocked knobs is a new one. Maybe his knobs run behind an IP and the provider blpcks knob removal?

    :)

    They just pull off BTW, use a knife to pry them up gently, turning the knob a little at a time and prying at the same time.

    January 30, 2009 at 8:38 pm #92270
    Fender&EHX4ever
    Moderator
    Quote:
    They just pull off BTW, use a knife to pry them up gently, turning the knob a little at a time and prying at the same time.

    Be sure to place a thin cloth between so you don’t screw up the knobs. I use a chamois cloth and a large flathead screwdriver to pry them off.

    January 30, 2009 at 9:51 pm #92282
    electro-melx
    Moderator

    I use half a wooden clothes peg. :)

    January 31, 2009 at 1:22 am #92315
    wildboy85
    Member

    r u joking on me:D??? eheh…
    It’s a very old memory man….they r hard to remove…and i don’t want to ruin the pedal!

    January 31, 2009 at 1:48 am #92318
    analogmike
    Participant

    it’s not easy!

    the best way I have found is to wrap a strong rag around under the pot. then pull up and rock back and forth and the knob should come off safely.

    Good luck!

    April 14, 2009 at 4:19 pm #95636
    tmcw
    Member

    Does the same thing go for a NYC Big Muff?

    April 15, 2009 at 10:44 am #95685
    electro-melx
    Moderator
    Quote:
    Does the same thing go for a NYC Big Muff?

    yup they are only pushed on, but they are pushed on with a machine so they are tight.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.