Home › Forums › Help/Technical Questions › Pedal Mod – OUTPUT MUTE

Tagged: , , , , ,

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 17, 2024 at 11:45 am #207961
    JimmyG
    Participant

    Hi, I just got the B9 and Synth9 pedals.

    I’m running a 2 amplifier setup.
    Dry Out into a Phaez G’Licious
    Keyboard Out to a Roland Cube 30

    The combination sounds amazing until I turn the pedal off.
    Then it sucks because you’re hearing a dry DI line guitar sound coming out of the “keyboard” amp while doing rhythm and lead guitar work.

    Is there a way to MUTE the guitar signal from coming thru the Organ/Synth outputs when the pedal is not engaged and only have the direct guitar signal coming out of the DRY output??

    Any suggestions, mods or fixes for this?

    JimmyG – The Rose City Rockers (BluesRock REvolution)

    January 18, 2024 at 1:33 pm #207964
    JimmyG
    Participant

    PS: & Yes, the DRY mix knob is completely off.

    January 20, 2024 at 8:04 am #208099
    EHX STAFF
    Keymaster

    Please contact the techs on Monday.
    There is a micro switch on the inside that lets you do that.
    It is mounted to the footswitch.
    Early units do not have it, so take a look

    January 29, 2024 at 10:32 am #208353
    JimmyG
    Participant

    My Synth9 HAS the microswitch, The B9 doesn’t (which is the one I mainly use) 🙁

    Can I order a new switch board or is there an ORGAN output mod that can be done?

    January 30, 2024 at 4:27 pm #208361
    EHX STAFF
    Keymaster

    Please contact the techs at info@ehx.com

    February 2, 2024 at 10:22 am #208629
    JimmyG
    Participant

    thanks, I did. havent heard anything back yet

    February 2, 2024 at 7:00 pm #208683
    EHX STAFF
    Keymaster

    Jimmy please double check your spam folder.
    If not I will send a message off to them Monday when they are back at work.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.