Home Forums Help/Technical Questions Pitch Fork into high gain amp?

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #189795
    Subvamp
    Participant

    Hi Folks,

    I’ve always used my Pitch Fork into a clean amp for 12 string-y/chorusy type effects, but recently I needed it to de-tune a 1/2 step for several songs in our set…keeps me from having to switch guitars. 🙂
    But, using it first in my chain (right after my tuner, only other pedal is a wah) and going straight into a Marshall on the gain channel, there’s a weird undertone to the distortion, almost like the Blend knob isn’t fully clockwise. Does this pedal just not like going into an amp’s gain channel?

    #189797
    EHX STAFF
    Keymaster

    No your best not putting into a high gain amps front end. It chews up the sound. Try an effect loop.
    That said some times it is cool into a distorted amp. It depends on the sound your after.

    There should not be anything but one note heard unless you have it set for two notes.

    #189798
    Subvamp
    Participant

    Ah ok, thanks for the info! It’s definitely an odd sound…cool in the right setting, but just trying to “re-tune” the guitar a 1/2 step, it’s definitely not right lol.

    I’ll give it a shot putting it in the loop. If that doesn’t work like I need it to, maybe just a dirt pedal after the Pitch Fork would work. 🙂
    Thanks again!

    #190208
    EHX STAFF
    Keymaster

    Make sure its not hum getting amplified. Use the EHX AC adapter and make sure its not hum from your guitar.

    #191657
    BaronVonJ
    Participant

    Is that a general comment about putting it before dirt? I thought pitch shifting effects go at the front of the chain. I’m also trying to use the m2 down with blend set to full wet for e-flat “tuning”, and it sounds like I’m still getting the dry signal coming through. I’m going into the clean channel of an Orange Crush 35rt, but it I do have various stacked dirt pedals after the pitch fork.

    #191793
    EHX STAFF
    Keymaster

    Baron the way you are using it going in front of the amp is best. It sounds more natural. if the blend is 100% effect you should not hear the original signal.
    BUT you will still hear it in the air as the guitar is close to your ears. Try recording it to see if you still hear the dry signal.

    #191810
    BaronVonJ
    Participant

    I just turned up my amp volume and I think you’re right.

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.