Home › Forums › Help/Technical Questions › Ocean 11 power supply

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 22, 2021 at 1:11 pm #184756
    Lukes0n
    Participant

    Hello,
    i’m having an issue with my pedalboard power supply Harley Benton PowerPlant ISO-1 Pro 8x 9 V DC @ max. 500 mA (individualy isolated). I measured voltage from PS and it reads 8.85V. Original PS reads 9.8V when i power pedal by board power supply its not working correctly on shim and poly its cutting the signal (switching on and off signal and blinking LED). Is it totally nescessary to power it with included PS or It needs to be above 9.6V all the time to work correctly or i have a bad pedal ?

    Thank you for your reply.

    • This topic was modified 3 years, 3 months ago by Lukes0n.
    August 22, 2021 at 1:49 pm #184759
    EHX STAFF
    Keymaster

    If the pedal works fine with the EHX supply than your HB power supply is to blame.
    Its under voltage and I bet under the proper current output.
    Cheaper budget supplies are a constant problem. While fine for a simple analog fuzz tone they are under proformers for digital pedals that draw more juice.
    Sorry

    August 22, 2021 at 2:11 pm #184760
    Lukes0n
    Participant

    Thank you for reply. This power supply is not bad for that money. You think thats problem with current or undervoltage ?

    August 23, 2021 at 4:00 pm #184826
    EHX STAFF
    Keymaster

    Please try it with the supply that came with the pedal.
    That will tell the story!
    All the pedals on your board may have brought the power supply down below what the Oceans needs.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.