Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 27, 2019 at 8:01 pm in reply to: 45000 Midi sync to Disaster Area BPM only, no start command #125018
    jpep83
    Member
    Quote:
    On Page 54 of the RJM Mastermind PBC 10 manual it says that you can optionally enable MIDI Start and Stop messages. The PBC will send out a MIDI Start message when you start sending MIDI Clock and will send a MIDI Stop message when you stop sending MIDI clock. MIDI Start/Stop will need to be enabled for on the Mastermind to work properly with the 45000.

    Very cool. I’ll look in to this. Thanks!

    March 26, 2019 at 10:32 pm in reply to: 45000 Midi sync to Disaster Area BPM only, no start command #125012
    jpep83
    Member
    Quote:
    Quote:
    The RJM can send all sorts of commands. I’ve seen a post somewhere where someone uses SYSEX message for Start and Stop commands for a Beat Buddy. Will the same command work for a 45000 or does anyone know the correct message for 45000? Are Start and Stop commands universal or product specific? A drum machine is sending some sort of message to the 45000. My question is, what is that message?

    Again, I really appreciate all the help and advice any one can give me.

    MIDI Start and Stop commands are universal. They are not product specific and they are not SYSEX commands. MIDI Start and Stop commands are System Real-Time messages, as is MIDI Clock. They work with MIDI Clock to synchronize MIDI devices to each other.

    Is there a specific RJM Mastermind model you’re interested in? We can look up its MIDI spec in it manual.

    I have the RJM Mastermind (discontinued version) and the newer RJM Mastermind PBC.

    March 16, 2019 at 5:06 am in reply to: 45000 Midi sync to Disaster Area BPM only, no start command #124951
    jpep83
    Member

    The RJM can send all sorts of commands. I’ve seen a post somewhere where someone uses SYSEX message for Start and Stop commands for a Beat Buddy. Will the same command work for a 45000 or does anyone know the correct message for 45000? Are Start and Stop commands universal or product specific? A drum machine is sending some sort of message to the 45000. My question is, what is that message?

    Again, I really appreciate all the help and advice any one can give me.

    March 15, 2019 at 4:15 pm in reply to: 45000 Midi sync to Disaster Area BPM only, no start command #124947
    jpep83
    Member

    Thank you for the reply. Correct, the SMARTClock only sends bpm info. Is there a workaround to use the 45000 as a live looper with full band to a global master click track and live tracks? I want the live loops to lock in place for every measure. Also, the manual doesn’t specify, but is there a midi command I could use to simulate a start command to begin recording? I could just use a midi controller like RJM Mastermind to send BPM info and a start command.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)