Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 4, 2019 at 8:45 pm in reply to: Super Switcher tap output work around? #125504
    bigolepedlboard
    Participant

    Thanks guys! The Quartz is perfect. I am going to get one to replace my Basilisk. The Quartz will send my Super Switcher’s midi clock info thru the quartz to the presets. I wont even need to use the tap jack. Thanks again for the tip!

    August 27, 2019 at 12:07 am in reply to: Super Switcher tap output work around? #125480
    bigolepedlboard
    Participant

    UPDATE. So I found this on Strymon’s forum site. [strong][/strong]
    [strong][/strong]
    “…..If you’d prefer to go with another external TAP tempo switch, we can’t recommend a specific one for you but, as long as the switch is designed with a momentary, single pole, double throw (SPDT) type switch that switches the TIP between the SLEEVE (ground or 0VDC) to the RING (5VDC) it should work fine.
    If you are unsure whether or not your TAP tempo switch provides these specs we kindly ask that you please contact the manufacturer of that switch for more information.”[strong][/strong]
    [strong][/strong]
    Any EHX folks know if its possible to mod the super switcher’s tap jack to do the above?[strong][/strong]
    [strong][/strong]
    I’ve emailed all this to the recommended EHX address as well. [strong][/strong]
    [strong][/strong]
    Thanks in advance!

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)