Hello Everyone. Glad to be here on this forum. I have two EH pedals. I have an older Small Stone, and a 70’s big Muff Pi Deluxe with Blend switch # EH 3053 C.
I am seeking help becuase my Big Muff Deluxe( the one with an AC power cord) needs a new power switch. I haven’t much of an idea how to determine what switch to get or where to get it.
There are three solder terminals( poles?) on it, and it is a two position switch (on -off). It says ‘1A- 125V DC’ on top, and on the bottom it says ; ‘4A 125V AC’ , and ‘2A 250V AC’.
I know enuf to solder in the new switch should I be able to locate it. I am hopeing its a fairly common type switch. If someone could help that would be dandy! Thanks again.
It’s an SPDT slide switch. The holes are probably tapped for 4-40 screws. What’s broken on it? If it’s the tip you can often open the switch up and replace it.
It’s an SPDT slide switch. The holes are probably tapped for 4-40 screws. What’s broken on it? If it’s the tip you can often open the switch up and replace it.
Thanks for the reply. No, the switch is shot. In fact it went out with a spark, so I’m hopeing it didnt fry something else down the line. So, I’ll look for an SPDT slide switch. Any ideas where to start looking and how to ask for it by value? Thanks again!
