Home › Forums › Help/Technical Questions › Memory Boy Problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 23, 2015 at 4:24 pm #83852
    TOMMYTHUNDERS
    Member

    Hi, I have an EHX Memory Boy that isn’t working. I’ve tried several power supplies, all center negative, all 9V with over 200 mA. When I plug the pedal in all of the appropriate lights come on, but I get no effect. The blend knob Allows full volume pass through, but no effect when turned all the way down, but no sound at all when turned all the way up. Obviously the blend knob is working, but the effect is not. How do I fix this?

    February 5, 2016 at 9:15 am #121254
    Ratsalk
    Member

    I, I’ve the same problem. What can I do !?

    February 5, 2016 at 1:23 pm #121255
    Scruffie
    Member

    I don’t know if it applies to the Memory Boy but in some of the Memory Toys, the daughter board holding the BBDs inside could become disconnected and needed pushing back in.

    If that’s not the issue you’ll probably need to contact EHX support.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.