If your unit has a 3 prong power cord, it must be plugged into a grounded (3 prong) AC outlet. DO NOT DEFEAT THE GROUND ON THIS DEVICE!! If there is a failure within the unit, the ground connection is your only protection against dangerous voltages!
If your unit came with an external power adaptor, use only this supplied power pack. Using the wrong power adaptor may damage your unit and void your warranty.
Your Deluxe Memory Man with chorus/vibrato is designed with state-of-the-art solid state circuitry to give you years of high quality, trouble-free performance.
Connect your guitar to the INPUT jack, and the OUTPUT jack into the input of your amp. Your Memory Man can be used in combination with other effects devices - experiment to develop your own unique sound. The bypass footswitch on top of the unit allows you to switch the effect in and out. Unmodified signal is always available at the DIRECT OUT jack. Set the LEVEL control so that the OVERLOAD LED blinks on with the loudest notes you play, but does not come on very brightly or too frequently. Overdriving the unit will cause distortion.
The BLEND control allows you to vary the mix of direct and delayed signals; it is set to the center position equal levels of both. FEEDBACK provides delay repeats, or multiple echoes. If set very high, runaway oscillation will occur. Fairly high feedback with short delay settings produces a reverb effect.
The DELAY control determines the time between direct and delayed signals, and between the repeats when feedback is used. Strange, eerie and unusual pitch-shift effects can be produced by changing the delay while playing, especially while using feedback.
The CHORUS/VIBRATO control introduces a modulation in the delay time: slow for chorus, faster for vibrato. This produces a “Doppler” pitch shifting in the delayed signal. A rich, vibrant chorus effect is produced with the switch set to CHORUS, delay fairly short, blend at the center, chorus set high, and feedback fairly high. When you determine the control settings for your favorite effects, make note of them so you can quickly set up the unit before playing.
Unplug after use. Avoid operating near moisture. Rock-n-Roll!
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please contact the appropriate office listed below. Customers outside the regions listed below, please contact EHX Customer Service for information on warranty repairs at email@example.com or +1-718-937-8300. USA and Canadian customers: please obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product. Include with your returned unit: a written description of the problem as well as your name, address, telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
c/o NEW SENSOR CORP.
55-01 2ND STREET
LONG ISLAND CITY, NY 11101
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
Tel: +44 179 247 3258
This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending upon the laws of the jurisdiction within which the product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at firstname.lastname@example.org
- FCC COMPLIANCE -
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC rules.